Remote Control Devices Honda

Remote Control Devices Honda

Extra description

Remote contol console for twin Installation for RIGHT HAND

Remote control with two control levers (for twin engine installation) with the possibility of forward / reverse. The remote control is equipped with a device to increase the idle speed, engine management systems hydroascent switch (controlled by the right hand).
The dimensions of the mounting hole - 140 x 110 mm.
Applicability: from BF40 up to BF225
 
REMOTE CONSOLE FOR SINGLE UNIT FOR THE RIGHT HAND

Remote control with single lever control (for single engine installation) with the possibility of forward / reverse. The remote control is equipped with a device to increase the idle speed, engine hydroascent system control switch (controlled by the right hand).
Dimensions of mounting hole - 140 x 65 mm.
Applicability: from BF40 up to BF225
 
SIDE bite type remote control for the right hand

Remote control with single lever control (for single engine installation) with the possibility of forward / reverse. The remote control is equipped with a device to increase the idle speed, device locking lever in the neutral position, the transmission, the engine management system hydroascent switch (controlled by the right hand).
Dimensions of mounting hole - 140 x 88 mm.
Applicability: from BF40 up to BF225
 
SIDE overhead TYPE REMOTE CONTROL

Remote control for outboard engines with manual starter and throttle position. Remote control with single lever control with the possibility of forward / reverse. It equipped with a device to increase the idle speed, emergency stop switch. Only to be mounted on the starboard side.
Applicability: motors BF9.9A / BF15A / BF15B
 
SIDE overhead TYPE REMOTE CONTROL

Remote control (without switching of hydraulic lift) is equipped with ignition switch, indicator light oil / engine heat low pressure safety switch, a lever to increase the idle speed, lever locking device in a neutral position, the transmission and removable wiring length of 4.8 m (16 ft) without connectors hydroascent system. To install both on the right and on the left side. Dual remote installation is available.
Applicability: new motors BF10D2 / BF10D4 / BF15D / BF20D
 
SIDE overhead TYPE REMOTE CONTROL

Remote control (without switching of hydraulic lift) for outboard motors with pneumatic lift system. The remote control is not equipped with hydraulic hoisting system and switch of the function to increase the idle speed on the lever.
Applicability: from BF25D4 to BF50A4
 
SIDE overhead TYPE REMOTE CONTROL

The remote control is equipped with ignition switch, warning light for low oil pressure / engine overheating, emergency stop switch, a lever to increase the idle speed, lever locking device in a neutral position, the transmission and removable wiring length of 4.8 m (16 feet) without connectors hydroascent system. To install both on the right and on the left side. Dual remote installation is available.
Applicability: motors BF20A / BF25A / BF30A / BF35A / BF40A / BF40AX / BF40B / BF40AX / BF45A / BF50A / BF50AX
 
SIDE overhead TYPE REMOTE CONTROL

Remote control with two control levers (for twin engine installation) with the possibility of forward / reverse. The remote control is equipped with a device to increase the idle speed, engine management systems hydroascent switch (controlled by the left hand).
Applicability: motors from BF75A2 to BF90A2

CONSOLE Remote Control for twin installations for the left arm

Remote control with two control levers (for twin engine installation) with the possibility of forward / reverse. The remote control is equipped with a device to increase the idle speed, engine management systems hydroascent switch (controlled by the left hand).
The dimensions of the mounting hole - 140 x 110 mm.
Applicability: from BF40 up to BF225
 
Remote Control CONSOLE FOR SINGLE UNIT left-handed

Remote control with single lever control (for single engine installation) with the possibility of forward / reverse. The remote control is equipped with a device to increase the idle speed, engine hydroascent system control switch (controlled by the left hand).
Dimensions of mounting hole - 140 x 65 mm.
Applicability: from BF40 up to BF225
 
Remote Control SIDE bite type left-handed

Remote control with single lever control (for single engine installation) with the possibility of inclusion of forward / reverse. The remote control is equipped with a device to increase idle speed, the device lock lever to the neutral, the engine hydraulic hoisting system control switch (controlled by the left hand).
Dimensions of mounting hole - 140 x 88 mm.
Applicability: from BF40 up to BF225
 
SIDE overhead TYPE REMOTE CONTROL

The remote control is equipped with ignition switch, warning light for low oil pressure / engine overheating, emergency stop switch, a lever to increase the idle speed, lever locking device in a neutral position, the transmission and removable wiring length of 4.8 m (16 ft). To install both on the right and on the left side. The double remote installation is available.
Applicability: motors BF8B1 / BF8D / BF9.9D to BF10D2
 
SIDE overhead TYPE REMOTE CONTROL

Remote control (with switch system hydroascent) is equipped with ignition switch, indicator light oil / engine heat low pressure safety switch, a lever to increase the idle speed, lever locking device in a neutral position, the transmission and removable wiring length of 4.8 m (16 ft) . To install both on the right and on the left side. Dual remote installation is available.
Applicability: from BF40A4 to BF50A4
 
SIDE overhead TYPE REMOTE CONTROL

Remote control for outboard motors with motor hydraulic hoisting system. The remote control is equipped with a switch control hydraulic hoisting system and does not have a function to increase the idle speed on the lever.
Applicability: BF25D / BF30D / BF40A4 / BF50A4 / BF75DK0 / BF90DK0 / BF115A2 / BF115A3 / BF130A2 / BF130A3 / BF135A4 / BF150A4 / BF175A3 / BF175A6 / BF200 / BF225
 
SIDE overhead TYPE REMOTE CONTROL

The remote control is equipped with the ignition switch, the motor hydraulic hoisting system control switch, warning light for low oil pressure / engine overheating, emergency stop switch, a lever to increase the idle speed, lever locking device in a neutral position, the transmission and removable wiring length of 4.8 m (16 ft) c connectors hydroascent system. To install both on the right and on the left side. Dual remote installation is available.
Applicability: motors BF40A / BF40AX / BF40B / BF40BX / BF45A / BF50A / BF50AX / BF75-BF90 A1/ A2 / A3 / AT / AV / AX
 
SIDE overhead TYPE REMOTE CONTROL

The remote control is equipped with the ignition switch, the motor hydraulic hoisting system control switch, warning light for low oil pressure / engine overheating, emergency stop switch, a lever to increase the idle speed, lever locking device in a neutral position, the transmission and removable wiring length of 4.8 m (16 ft) . To install both on the right and on the left side. Dual remote installation is available.
Applicability: motors from BF115 up BF130A1 / A2 / AX